Mobile: +8618566295225
E-mail: tina@magicleafbags.com
This signal blocking bag is a compact pouch for compatible car keys and small items. The listed size is 12.5 × 8 cm. Magicleaf offers custom options for brands, distributors and corporate buyers.
The shielding layer is intended to reduce wireless communication when the key is fully inside and the pouch is closed. Test a finished sample with your target key and vehicle before placing a bulk order.
Product Details
This signal blocking bag is a compact Faraday bag for compatible car keys and small items. The listed size is 12.5 × 8 cm. Magicleaf offers custom colors, logos, styles and packing for OEM orders. Buyers can use this model as a starting point for a branded pouch.
The shielding layer is intended to reduce wireless communication when the key is inside and the pouch is fully closed. Test a finished sample with your target key and vehicle. Complete this check before you approve a bulk order.
Share the intended contents and order quantity at the start. Include any special fit, packing or test needs. This gives Magicleaf a clear brief for the sample and quotation.
The listed pouch size is 12.5 × 8 cm. Ask Magicleaf whether this refers to the outer size. Also request the usable inner size. The space inside may differ from the measurements shown outside.
Measure your key with its case attached. Include any ring or small accessory that will stay inside. A key that enters the pouch may still leave too little room to close it fully.
If your order covers several key models, list them in the brief. Check each size on the sample. Cards and other small items also need a fit check. Their shielding needs must be assessed apart from those of a vehicle key.
A Faraday enclosure uses conductive material to reduce the passage of wireless signals. This is called radio-frequency shielding, or RF shielding. The fabric is one part of the design. Seams, openings and the closing method also matter.
The listed material options include PU, polyester and shielding fabric. These materials may have different roles. Confirm which material forms the outer surface and which provides shielding. Do not treat PU or polyester alone as proof of signal reduction.
Ask which pocket is intended to provide shielding. Check the full closing method on the sample. The key must remain inside that pocket during the test. Any change to the layers or closure needs review before approval.
A fabric report does not show how the whole pouch will perform. No tested frequency range or shielding level is supplied here. Buyers who need a specific result should state it before sampling.
| Item | Details |
|---|---|
| Product Reference | P-27 |
| Product Name | Signal Blocking Bag for Car Key Fobs |
| Product Type | Compact Faraday-style pouch |
| Intended Contents | Compatible vehicle keys, contactless cards and small items. Check fit and shielding needs separately. |
| Listed Size | 12.5 × 8 cm. Confirm the usable inner size. |
| Material Options | PU, polyester, shielding fabric or buyer-specified materials |
| Standard Packing | OPP bag |
| Custom Options | Color, style, logo, interior layout and packing |
| Samples | Available. Dispatch is arranged in about 10 business days, subject to confirmation. |
| MOQ | 200 pcs. Confirm any minimums per color or design. |
Use a finished sample, not just a piece of fabric. Test the key and vehicle planned for the project. Follow the closing method agreed for that design. Keep a record of the steps so you can repeat the check.
Test the functions that matter to your project. Remote button use and passive entry are different functions. State which ones you need to assess. Do not assume that one check covers every way the vehicle uses its key.
Results from one model do not prove a fit for every vehicle. Include all target models where the order needs that coverage. A practical vehicle check is not a laboratory shielding rating.
If you need a report, send the test requirements before sampling. Include the signal ranges, method and result you need. Magicleaf will review the request. Check whether any available report covers the fabric or the finished pouch.
Magicleaf supports OEM and private-label orders for this model. Send a clear brief and artwork for review. Custom work can focus on the look, layout and packing. Available choices depend on the materials and design.
For the logo, provide the size and preferred position. Include the artwork and a color reference. Magicleaf will check a suitable method for the chosen surface. Review the result on the sample before giving approval.
For custom packing, send the pack size and artwork. Add any label, barcode or insert needs. State whether each pouch needs its own retail pack. Confirm these details as part of the quoted order.
For a new size, divider or carry feature, send a drawing or image. Magicleaf will check whether the change is possible. Ask how it affects cost, MOQ and sample time. Changes to the shielding layers or closure may also need new tests.
Review the sample for fit, finish and branding. Use the same contents planned for the order. Keep these checks separate from the vehicle test. A good visual finish does not prove shielding performance.
Send a clear list of changes before sample approval. Use marked photos where they help explain an issue. Keep the final sample and written details as order references. Confirm any later change before production starts.
Car accessory brands can assess this model for a branded product range. Retailers can review the logo, pack and product text. Distributors can define the material, size and order mix. Corporate buyers can submit artwork and individual packing needs.
State how you plan to describe and sell the pouch. Any shielding claim should match the evidence for the approved design. Do not treat the product name as a test result. The pouch is not a lock or a physical barrier against theft.
For mixed orders, list the quantity for each color or design. The stated MOQ is 200 pcs. This does not confirm that every mix is available at that quantity. Ask Magicleaf to confirm the order split during quotation.
Do not assume that every bag blocks every signal. Results depend on the signal range, materials, seams and closure. Test the finished design for the functions you need.
It may be tested with your chosen card and reader. Send their details before sampling. A vehicle key test does not prove card-shielding performance.
Yes. Keep the contents fully inside the shielding pocket. Leave the closing area clear. Follow the instructions for the approved design.
Magicleaf can review a custom size request. Send the contents measurements and a drawing if available. A new size needs a fit check and sample approval.
Yes. Send the artwork, logo size and preferred position. The chosen method must suit the material. Check the logo finish on the sample.
The listed dispatch time is about 10 business days. Confirm the timing for your chosen design and artwork. Shipping transit time is additional. Sample dispatch is not the same as the bulk production lead time.
Hubei Magicleaf Technology Co., Ltd. makes custom bags and pouches for OEM and ODM projects. Its range includes shielding pouches, car accessories, travel bags and other storage products.
According to company information, Magicleaf has more than 3,000 square meters of factory space. The company lists 50 skilled workers and 100 sewing machines. These figures describe the company, not the shielding level of P-27.
For this model, Magicleaf reviews materials, size, closure, branding and packing before sample development. Buyers should define any required tests as part of the project brief.
Send the details below to Magicleaf for a project review. A clear brief helps both sides check the scope before confirming the sample plan and price.
Magicleaf will review the brief before confirming the proposed design. Sample costs, order splits and lead times need quotation confirmation. Agree on the final specifications before placing the bulk order.
Get in Touch