Welcome to Hubei Magicleaf Technology Co., Ltd.

Mobile: +8618566295225

E-mail: tina@magicleafbags.com

EMF Protection Bag with Silver Fabric for Phones

This EMF protection bag uses silver fiber and metal fiber shielding fabric. The listed size is 20 × 10 cm, and the listed weight is 30 g. It is intended for temporary phone signal isolation when fully closed.

Magicleaf offers custom color, logo and packing options. Check a finished sample with your target phone before placing a bulk order.

  • Silver fiber and metal fiber shielding fabric
  • Listed size: 20 × 10 cm; confirm usable inner size
  • Listed weight: 30 g
  • Custom color, logo and packing
  • MOQ: 500 pcs
  • Samples available; confirm dispatch within 10 business days

Product Details

EMF Protection Bag with Silver Fabric for Phones

This EMF protection bag is a compact pouch for compatible phones. It uses silver fiber and metal fiber shielding fabric. The listed size is 20 × 10 cm, and the listed weight is 30 g. Magicleaf offers custom colors, logos and packing for OEM orders.

The pouch is intended for temporary wireless signal isolation. Place the phone fully inside the shielding pocket and close it as designed. Test a finished sample with your target device before approving a bulk order.

Check Your Phone Size

Measure the phone with its case attached. Check its length, width and thickness. Ask Magicleaf to confirm the usable inner size. The listed 20 × 10 cm size alone does not prove that a phone will fit.

  • Include the phone case and any attached parts in your measurements.
  • Make sure the device fits fully inside the shielding pocket.
  • Leave enough space to close the pouch without force.
  • Check that the phone can be put in and taken out with ease.

The pouch may also hold other small electronic devices that fit inside. Confirm their fit and test needs separately. A result from one phone does not prove the same result for every device.

Silver Fabric and Shielding Layers

Faraday bags use a conductive layer to reduce wireless signals. This model uses silver fiber and metal fiber shielding fabric. The seams and closure also affect the finished pouch. A fabric test alone does not prove how the whole bag will perform.

Confirm the layer layout and closing method during sample review. Check which section is intended to provide shielding. Keep the phone fully inside that section during use.

No tested frequency range or shielding level is supplied here. The product name does not establish a health benefit or a medical level of protection. Buyers should define the signal-isolation result their project needs.

Silver fiber and metal fiber shielding fabric layer reference

Product Specifications

Item Details
Product Name Silver Fabric Phone Shielding Pouch
Product Type Phone pouch for temporary wireless signal isolation
Shielding Material Silver fiber and metal fiber shielding fabric
Listed Size 20 × 10 cm; confirm usable inner size
Listed Weight 30 g
Standard Packing OPP bag
Custom Options Color, logo and packing
Samples Available; listed dispatch time is within 10 business days. Confirm timing for the chosen design.
MOQ 500 pcs; confirm any minimums per color or design

Compact phone pouch made with silver fiber shielding fabric

Test with Your Target Phone

Use a finished sample and the phone model planned for the project. Choose the functions you need to check. Follow the same steps each time so the results can be compared.

  • Check that the chosen function works outside the pouch.
  • Place the phone fully inside the shielding pocket.
  • Close the pouch as instructed.
  • Test the relevant functions, such as calls, Wi-Fi or Bluetooth.
  • Record the device, settings, location and results.

Signal conditions can vary by location and network. The phone model and closing method also matter. Keep a record of the conditions used for sample approval.

A practical phone check is not a laboratory shielding rating. If you need a report, send the required test method, frequency ranges and target results before sampling. Magicleaf will review the request.

Closing and Handling the Pouch

Check the closing steps on the sample. Keep the opening clear of the phone and any attached parts. Do not force an oversized device inside. The pouch must close fully as designed.

Inspect the inner surface, seams and closing area during review. Note any damage or gaps that need attention. If the material or closure changes, review the revised sample before accepting it for the order.

Confirm the phone functions you need before choosing this type of storage. The pouch is intended for periods when normal wireless access is not required. A reduced connection may also prevent calls or messages from reaching the stored phone.

Custom Colors, Logos and Packing

Magicleaf offers color, logo and packing options for this model. Buyers can review these choices for private-label retail, travel accessories and corporate projects.

  • Colors to suit a brand or product collection
  • Logo size and position based on the artwork and available space
  • OPP bags or custom retail and gift packing
  • Sample review before the bulk order is approved

Send the logo artwork, preferred size and position. Include a color reference if matching matters. Magicleaf will review a suitable logo method for the selected surface. Check the final appearance on the sample.

For custom packing, provide the pack size and artwork. Add any label, barcode or insert needs. Confirm the pack with the product sample before giving approval.

Changes to size, closure, outer material or pocket layout are not listed standard options. Send a drawing or reference image for review. Confirm any effect on cost, MOQ, tests and sample timing.

Five illustrated color options for the phone shielding pouch

Sample Approval Checklist

Review fit, finish and branding as well as the required functions. Use the phone and case planned for the project. A visual check does not replace a signal test.

  • Measure the pouch and check the usable inner space.
  • Inspect the seams, edges and inner layers.
  • Check the closing method with the phone inside.
  • Compare the material color with the agreed reference.
  • Review the logo size, position and finish.
  • Check packing details and printed information.
  • Record the agreed device tests and results.

Send changes to Magicleaf before sample approval. Keep the approved sample, artwork and written details as order references. Confirm later changes before production starts.

Uses and Buyer Needs

Accessory brands can assess this model for a phone storage range. Travel product distributors can review its size and packing. Corporate buyers can define the device models, branding and intended storage routine.

The pouch can be evaluated for meetings, transport or other planned periods without normal phone connectivity. Each project should define which functions need to be reduced. Do not assume the same result for every phone or setting.

Describe the product using claims supported by the approved design. Do not add medical, EMP or forensic claims without evidence that applies to the product and intended use.

Silver fabric phone pouches shown in blue and purple

Example of a Branded Phone Pouch Project

This is an illustrative example, not a completed customer project. A buyer is planning a phone pouch for a branded accessory range. The buyer has selected phone models and needs a logo and individual retail packing.

Buyer Requirement: The pouch must fit the chosen phones with their cases attached. The buyer also needs an agreed color, logo position and test plan.

Proposed Approach: Magicleaf would review the phone dimensions, artwork and packing brief. The buyer would then check a sample for fit, closure, appearance and the required signal-isolation result.

Intended Outcome: An approved sample and written specification would serve as references for the bulk order. Production would follow agreement on the design and order terms.

Frequently Asked Questions

What is this pouch designed for?

It is intended for temporary phone signal isolation when fully closed. Confirm fit and function with the device planned for your project.

Will my phone fit?

The listed size is 20 × 10 cm. Ask for the usable inner size. Measure your phone with its case and check that the pouch can close fully.

What does the pouch weigh?

The listed weight is 30 g. Confirm the final weight if the materials, size or added features change.

Which wireless functions should I test?

Choose the functions your project needs to assess. These may include calls, Wi-Fi or Bluetooth. Test them separately with the finished sample. One result does not prove that every signal is blocked.

Can I add a logo or change the packing?

Yes. Color, logo and packing are listed custom options. Send the artwork and packing brief for review. Changes to the structure need a separate check.

What is the MOQ?

The stated MOQ is 500 pcs. Confirm any minimums per color or design before planning a mixed order.

When can a sample be shipped?

The listed sample dispatch time is within 10 business days. Confirm availability and timing for the chosen design. Shipping transit time is additional.

About Magicleaf

Hubei Magicleaf Technology Co., Ltd. makes custom bags and pouches for OEM and ODM projects. Its range includes shielding pouches, travel bags, tactical bags and other storage products.

According to company information, Magicleaf has more than 3,000 square meters of production space, 50 skilled workers and 100 sewing machines.

For this model, Magicleaf reviews branding and packing needs. Magicleaf can also assess requests for changes to the size, materials or closing method before sampling.

Phone shielding pouches shown in bulk packing

Request Product Information

Send the following details to Magicleaf for a project review and quotation.

  • Order quantity and destination country
  • Phone models and measurements, including cases
  • Preferred color and material requirements
  • Logo artwork, size and position
  • Packing, label and barcode needs
  • Required device tests or reports
  • Sample needs and preferred delivery schedule

Magicleaf will review the brief before confirming the proposed design and sample plan. Sample costs, order terms and production lead time need quotation confirmation.

Get in Touch

* Name

* E-mail

Tel.

* Message

* CAPTCHA